ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
An air drill has no motor to burn out and no battery to flatten, which is why it stays in production and body shop use where a stall under load would end an electric tool. The Drill 10 mm Comp PRO turns 2,000 rpm on 480 l/min at 6.3 bar, weighs 1 kg in a composite housing, and switches between clockwise and anticlockwise one-handed.
A built-in silencer keeps it quiet enough for continuous use, and a kit version with a keyless chuck covers DIY and semi-professional work. Abtaz supplies ABAC air drills for wood and metalworking and vehicle workshops. Send us the material, the hole size and whether the drill will run continuously, and we will confirm a model and the flow it needs.
10 mm chuck at 2,000 rpm and 1 kg, reversible, with a built-in silencer.
A powerful drill for wood and metalworking and car workshops, driven by a high-performance compressed air motor in a super-lightweight composite housing. Clockwise and anticlockwise operation switch one-handed to save time, and a built-in silencer keeps it quiet.
Reversible drill supplied as a kit, with a keyless chuck and rubber handle.
The kit version for DIY and semi-professional work. It is reversible, uses a keyless chuck so bits change without a key, and the rubber handle cover isolates the hand, reduces vibration and improves grip.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Drill 10 mm Comp PRO, Drill Kit G-190), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE