ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
A tyre inflator is a measuring instrument as much as a tool, which is why the professional versions carry EC type approval: the reading can be relied on and used commercially. ABAC offers a car and light vehicle version with a quick lock valve adapter, a truck version with a double valve connector for the twin valves on truck and bus wheels, and a DIY version scaled in both bar and psi.
The professional tools are rated to 12 bar working pressure and are fully rubber coated over both body and manometer, because an inflator spends its life being dropped on a workshop floor. Abtaz supplies ABAC inflators for tyre bays, vehicle workshops and fleet maintenance. Send us the vehicle type and whether you need type approval, and we will confirm a model.
EC type approved, fully rubber-coated, with a quick lock valve adapter.
The professional inflator for car and light vehicle work. It carries EC type approval, so the gauge can be relied on, and the body and manometer are fully rubber coated to survive being dropped. The quick lock valve adapter fits one-handed.
EC type approved truck version, with a double valve connector for buses.
The truck workshop version, with a double valve connector for the twin valves on truck and bus wheels. It is otherwise the same EC type approved, fully rubber-coated tool, rated to 12 bar working pressure.
Standard DIY inflator with a manometer scaled in bar and psi.
The DIY inflator, for car and bike tyres and general inflating. The manometer is scaled in both bar and psi, which matters when the pressure on the door plate and the pressure on the gauge are quoted in different units.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Tyre Inflator PRO CEE QL, Tyre Inflator PRO CEE TR, Tyre Inflator G-580), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE