ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
A spray gun atomises paint into a controlled jet, and the quality of the result depends as much on the air behind it as on the gun itself. ABAC offers a standard gun with adjustable jet and independent paint and air controls, a mini gun for smart repairs and detail work, and a semi-professional gun with a stainless steel nozzle for a finer, more even finish.
Spraying is the application where air treatment stops being optional: oil or water carried through from the compressor will show in the finish and cannot be corrected afterwards. Abtaz supplies ABAC spray guns together with the filtration and drying needed to feed them. Send us the material, the area and the finish required, and we will confirm a gun and an air quality class.
Standard spray gun with adjustable jet and separate paint and air controls.
The standard paint spray gun, with an adjustable spray jet and independent adjustment of paint and air supply so the finish can be tuned to the material. It covers the general DIY and refinishing work most users buy a spray gun for.
Mini spray gun for detail and touch-in work on small areas.
The mini gun, for smart repairs and detail work where a full-size gun puts down too much material and cannot be controlled at the edges of a small area.
Semi-professional gun for work needing a finer, more even finish.
The semi-professional gun, for applications where finish quality is the point rather than covering ground quickly. It gives a smoother, wider spray jet with adjustable paint and air supply, on a stainless steel nozzle.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Paint Spray Gun G-541A, Paint Spray Gun G-542F, Paint Spray Gun G-550F), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE