ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
A blow gun is the tool every compressed air installation ends up using most, for clearing swarf and dust, drying parts after washing and cleaning down machinery between jobs. ABAC builds them in robust housings, in a standard version supplied with an extension pipe for reaching into recesses and a lighter version for operators holding the tool through a shift.
Because a blow gun is used constantly and often by people who are not thinking about air quality, it is worth putting it downstream of proper filtration. Abtaz supplies ABAC blow guns alongside the filters and separators that keep the air they deliver clean. Send us the application and we will confirm a gun and the filtration behind it.
Standard blow gun with an extension pipe, for dedusting and drying.
The standard air blowing gun, supplied with an extension pipe so air can be directed into a recess without moving the workpiece. It suits the everyday dedusting, drying and cleaning that every workshop needs.
Lightweight blow gun for multiple applications, in a robust housing.
The lightweight option, for operators using a blow gun continuously through a shift where weight in the hand matters. It is built in a robust housing for the same dedusting, drying and cleaning duties.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Air Gun G-502, Air Gun G-503), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE