ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
An air screwdriver holds its torque setting all day and does not heat up on repetitive assembly, which is what separates it from a cordless tool on a production line. ABAC offers a pistol grip and a straight body, both at 1,800 rpm and 8 Nm on 480 l/min at 6.3 bar, with stepless torque adjustment on the outer adjusting ring rather than a stepped clutch.
The pistol version weighs 1.1 kg and switches direction one-handed; the straight version weighs 1.2 kg and can be hung on a balancer, which takes the weight off the operator entirely on a repetitive line. Both have exhaust air silencers. Send us the fastener, the torque and the cycle rate, and we will confirm a model.
1,800 rpm pistol grip at 1.1 kg, 8 Nm, with stepless torque adjustment.
A lightweight pistol-grip screwdriver for the wood and metalworking industries, in a super-light ergonomic composite housing. A built-in silencer keeps it very quiet, direction switches one-handed, and torque is set steplessly on the outer adjusting ring.
1,800 rpm straight body at 1.2 kg, suitable for hanging on a balancer.
The straight-bodied screwdriver, for assembly positions a pistol grip cannot reach comfortably. It has an anti-slip ergonomic handle, an exhaust air silencer for extremely low noise, stepless torque adjustment on the outer ring, and can be hung on a balancer.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Screwdriver Pistol Comp PRO, Screwdriver Straight PRO), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE