ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC builds two sanders for different jobs. The Belt Sander 330-10 PRO runs a 10 x 330 mm belt at 20,000 rpm and weighs 0.85 kg, for getting into welds, edges and confined bodywork. The Orbital Sander 150 Comp PRO takes a 150 mm pad with a 5 mm stroke at 12,000 rpm, for finishing flat and gently curved surfaces without leaving a pattern.
Both are built around low vibration, because sanding is continuous work and vibration is what ends a shift early. They draw 402 and 420 l/min at 6.3 bar. The orbital takes standard 150 mm paper in 15-hole, 8-hole and 6-hole patterns, and spare pads and belts are stocked. Send us the material, the finish required and the area, and we will confirm a sander and an abrasive.
10 x 330 mm belt at 20,000 rpm and 0.85 kg, for wood, metal and bodywork.
A compact belt sander for professional use in wood and metalworking and in car workshops. The exhaust air is guided to the rear so swarf is not blown across the work, the actuating lever has a trigger safety device, and an automatic belt tensioner makes belt changes quick.
150 mm pad with a 5 mm stroke, 12,000 rpm, particularly low air consumption.
A universal orbital sander with a 5 mm stroke and reduced vibration for fatigue-free work. The narrow collar leaves an unobstructed view of the workpiece, and it takes standard 150 mm sanding paper in 15-hole, 8-hole and 6-hole patterns at 420 l/min.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Belt Sander 330-10 PRO, Orbital Sander 150 Comp PRO), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE