ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
A ratchet wrench gets into the places a straight or pistol tool cannot, which is why it is the tool of choice inside an engine bay or a vehicle cabin. ABAC offers 1/4 inch and 1/2 inch versions at 41 and 68 Nm, plus a 1/2 inch impact version at 122 Nm whose impact mechanism absorbs the reaction so there is no kickback into the operator’s hand.
The tools draw 300 to 360 l/min at 6.3 bar, so a modest compressor will run one. All have rubber handle grips and protective rubber on the ratchet head, and a kit version is available with sockets in a case. Abtaz supplies ABAC ratchet wrenches for vehicle servicing, assembly and maintenance. Send us the access you need and the torque, and we will confirm a drive size and a model.
122 Nm with an impact system that removes kickback, 600 rpm at 1.46 kg.
A powerful ratchet wrench with an impact system, so the reaction goes into the mechanism rather than the operator's wrist. It runs 600 rpm on 360 l/min at 6.3 bar, with a rubber handle grip and a protective rubber collar on the ratchet head.
The 1/2 inch ratchet supplied as a complete kit with sockets in a case.
The kit version for DIY and semi-professional work, supplied with sockets and accessories in a plastic case. It suits the occasional user who needs the access a ratchet gives in an engine bay without buying the tool and sockets separately.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Ratchet Wrench 1/2" Imp. PRO, Ratchet Wrench Kit 1/2" G-150), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE