ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
An impact wrench delivers torque in blows rather than as steady rotation, which is how it breaks a seized fastener without putting the reaction into the operator’s wrist. ABAC builds the range around a twin hammer system, from the 1/2 inch PRO mini at 700 Nm breakaway and 1.1 kg, through the 1/2 inch and 3/4 inch Comp PRO at 1,750 and 2,978 Nm, to the 1 inch L Comp PRO at 4,356 Nm. A kit version covers DIY and semi-professional work.
Air consumption runs from 318 l/min on the mini to 1,440 l/min on the 1 inch L, all at 6.3 bar, so the larger tools need a compressor sized accordingly. Abtaz supplies ABAC impact wrenches for vehicle workshops, tyre bays, assembly lines and maintenance. Send us the fastener size, the breakaway torque you need and how many tools will run at once. We will confirm a model and the flow your compressor has to deliver.
1,750 Nm breakaway at 2.1 kg, 552 l/min at 6.3 bar, for universal workshop use.
The general-purpose size, with a lightweight composite housing and a high-performance twin hammer system. It turns 7,500 rpm on a 1/2 inch square drive, delivering 1,100 Nm working torque and 1,750 Nm breakaway torque, on a rubber handle grip.
4,356 Nm breakaway on a 1 inch drive, for truck, bus and heavy vehicle work.
The heavy-duty end of the range, built for light truck and van applications. It delivers 2,700 Nm working and 4,356 Nm breakaway torque at 5,000 rpm, drawing 1,440 l/min through a 1/2 inch air fitting, at 13.4 kg.
Solid 1/2 inch impact wrench supplied as a complete kit in a plastic case.
The kit option for DIY and semi-professional work, supplied in a plastic case with four different sockets and the accessories needed to start. It uses the same twin-hammer principle as the professional tools in a simpler package.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
The Air Tools section of ABAC's current general catalogue, pages 103 to 131, with the specification table for each model in this range (Impact Wrench 1/2" Comp PRO, Impact Wrench 1" L Comp PRO, Impact Wrench Kit 1/2" G-101), covering air consumption, speed, torque, weight, dimensions and vibration to EN-ISO 28927-9.
DOWNLOAD CATALOGUE