ABAC builds its air tools in two lines. The Professional line is made for intensive and complex work, with the torque, balance and ergonomics that vehicle workshops, assembly plants and light industry need through a full shift. The DIY and Hobby line covers lighter and occasional work. Between them the programme runs to impact wrenches, ratchet wrenches, die and angle grinders, sanders, drills, screwdrivers, saws, chisel hammers and needle scalers, plus paint guns, blow guns, tyre inflators, sand blasters, nailers and staplers, with accessory kits and consumables alongside.
Published figures are per model: the Impact Wrench 1/2" PRO mini delivers 700 Nm of breakaway torque at 1.1 kg on 318 litres per minute at 6.3 bar, the 1/2" Comp PRO reaches 1,750 Nm, and the 3/4" Comp PRO reaches 2,978 Nm on 546 litres per minute for light truck and van work. Abtaz sizes tools and compressor together, because a tool starved of flow feels underpowered whatever its rating. Send us the tools you intend to run and how many will be used at once, and we will confirm the models and the flow the compressor has to supply.
ABAC air impact wrenches from 700 to 4,356 Nm breakaway torque, in 1/2, 3/4 and 1 inch drives, with a twin hammer system.
ABAC air ratchet wrenches in 1/4 and 1/2 inch drives, 41 to 122 Nm, including an impact version with no kickback.
ABAC air sanders: a 10 x 330 mm belt sander at 20,000 rpm and a 150 mm orbital sander with a 5 mm stroke.
ABAC air grinders: angle and long die grinders at 20,000 to 25,000 rpm, a 125 mm angle grinder and a long neck cut-off tool.
ABAC air drills with a 10 mm chuck at 2,000 rpm, reversible, in professional and kit versions.
ABAC air screwdrivers at 1,800 rpm and 8 Nm, in pistol and straight bodies with stepless torque adjustment.
ABAC Saw Comp PRO air body saw at 9,500 rpm and 0.8 kg, for cutting sheet metal and plastic panels.
ABAC air chisel hammers on 10 and 12 mm shanks, 3,000 to 4,500 blows per minute, with stepless impact adjustment.
ABAC air needle scalers with 19 or 28 needles at 3,500 to 3,700 blows per minute, for rust, scale and coating removal.
ABAC air blow guns in standard and lightweight versions, for dedusting, drying and cleaning down.
ABAC paint spray guns in standard, mini and semi-professional versions with adjustable paint and air supply.
ABAC tyre inflators, EC type approved for professional use to 12 bar, in car, truck and DIY versions.
ABAC sand blasting guns in dip tube and hopper versions, for rust, paint and scale removal.
ABAC Combi Nailer G-301, one tool taking both brad nails and staples, for furniture, flooring and modelling.
ABAC air tool kits in 8-piece and 49-piece sets plus a stapling kit, matched to smaller compressors.
We supply ABAC air tools in both the Professional and DIY lines: impact wrenches to 2,978 Nm, ratchet wrenches, grinders, sanders, drills, screwdrivers, saws, chisel hammers and needle scalers, with paint guns, blow guns, tyre inflators and accessory kits.