ABB LV Titanium motors put an IE5 ultra-premium motor and its drive module in one unit. Speed control sits on the motor instead of in a cabinet. The range covers 1.5 to 30 kW. IP55 is standard, and IP56 or IP65 are options.
The installation needs no separate drive enclosure and no long motor cable. That removes a common source of cable-borne interference and frees panel space. Abtaz supplies ABB LV Titanium motors for pumps, fans and conveyors where cabinet space is short. Send us the duty point and we will confirm a rating.
1.5 to 30 kW in frame sizes 71 to 160, all in efficiency class IE5.
ABB supplies LV Titanium as one platform rather than as named series, so the selection is a configuration rather than a choice between product families. It covers 1.5 to 30 kW across IEC frame sizes 71 to 160, with IP55 as standard and IP56 or IP65 as options. Every rating carries the drive module on the motor, and ABB places the machine at least two frame sizes below an equivalent induction motor.
Cast iron IEC low voltage induction motors up to 355 kW, in efficiency classes IE2 to IE4, for pumps, fans and compressors in general industrial duty.
IEC low voltage motors from 0.12 to 1,300 kW, configured to the installation and available up to efficiency class IE5, for demanding process plant.
Magnet-free IE5 and IE6 synchronous reluctance motors from 0.75 to 450 kW, driven by an ABB inverter, for pumps, fans and compressors.
ATEX and IECEx certified low voltage motors from 0.12 to 1,000 kW, in flameproof, increased safety and dust ignition proof versions.
Rib cooled and modular high voltage induction motors up to 28.5 MW and 13.8 kV, for mills, large pumps, fans and compressors.
Not sure which solution best fits your application? Our engineers are available to review your requirements and help you select the most suitable products and materials for your project.
Official ABB product note for the LV Titanium variable speed motor, June 2025. ABB has not published a full catalogue for this range.
DOWNLOAD CATALOGUE